Using clogin to automate some boring stuff

In some cases we need do some boring stuff, for example, checking every devices to document hardware type, serier number; to backup configuraiton; doing the same tiny changes on each network devices. It is time-consuming too if you have massive similar devices that you have to login and check one by one. This type of works can be automated by using clogin plus some simple scripts.

According to the maual,  clogin is an expect(1) script to automate the process of logging into a Cisco router, Catalyst switch, Extreme switch, Juniper ERX/E-series, Procket Networks, or Redback router. There are complementary scripts for Alteon, Avocent (Cyclades), Bay Networks (nortel), ADC-kentrox EZ-T3 mux, Foundry, HP Procurve switches and Cisco AGMs, Hitachi routers, Juniper Networks, MRV optical switch, Mikrotik routers, Netscreen firewalls, Netscaler, Riverstone, Netopia, Cisco WLCs and Xirrus arrays.

clogin reads the .cloginrc file for its configuration, then connects and logs into each of the routers specified on the command line in the order listed. Command-line options exist to override some of the directives found in the .cloginrc configuration file.

Below are simple examples of how clogin works:

Example 1

We want to login to each devices and check its serier number.  Let us assume that we have 20 devices, all of them are Juniper EX switches. Indead of logining and checking every devices, we can do the following script in Linux:

  1. list all devices hostname into a file “switches”
  2.  run the following script: for i in `cat /tmp/switches`; do /local/rancid/bin/clogin -autoenable -c “show virtual-chassis” $i >> /tmp/switchessn; done
  3. trim “switchessn” file to remove noneed text if necessary. now we have a file that contain all serier number and hardware type of switches

Example 2

If we need find our root bridge for each vlans in a layer 2 networks. Below is the script that I learned:

  1. Run the the first step to get the bridge ID´s of all the switches listed int eh file swtiches.txt
    for i in `cat /tmp/switches.txt`; do /local/rancid/bin/clogin -autoenable -c "sh spanning-tree bridge \n\n end" $i > /tmp/$i; done
  2. Purge the documents from step 1 to only contan the isolated bridge-id for each switch
    for b in `cat /tmp/switches.txt`; do egrep -o -m 1 "[[:space:]][[:alnum:]]{1,4}\.[[:alnum:]]{1,4}\.[[:alnum:]]{1,4}[[:space:]]" /tmp/170390/$b > /tmp/access-bridge-id/bridge-id_$b.txt; done
  3. As step 3 to collect the “spanning-tree root-id” table from each swith in the switches.txt document
    for v in `cat /tmp/switches.txt`; do /local/rancid/bin/clogin -autoenable -c "sh spanning-tree root \n\n end" $v > /tmp/root-id/root-id_$v; done
  4. Collect all file names containing the access-switch bridge-id´s to one file for parsing during the last step:
    printf "%b\n" /tmp/170390/access-bridge-id/* > /tmp/170390/access-bridge-id/access-bridges.txt
  5. Finally extract all the entries from the previous steps to find out what VLAN´s each access-switch is root bridge for.
    for x in `cat /tmp/170390/access-bridge-id/access-bridges.txt`; do grep -f $x /tmp/170390/root-id/* >> /tmp/170390/final/final.txt ; done

Leave a Reply

Fill in your details below or click an icon to log in: Logo

You are commenting using your account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s